Kitchen cabinet knobs were screwed in the wrong place?

June 5th, 2008 | by admin |
DCgurl asked:

My kitchen cabinet knobs were screwed on the side (like the were suppose too) but instead of the corner were screwed on in the middle. What can I do to correct this?

Question posted courtesy of: Mathew
Share and Enjoy: These icons link to social bookmarking sites where readers can share and discover new web pages.
  • Digg
  • Bumpzee
  • del.icio.us
  • Facebook
  • Furl
  • Mixx
  • NewsVine
  • Reddit
  • StumbleUpon
  • YahooMyWeb
  • Google
  1. 5 Responses to “Kitchen cabinet knobs were screwed in the wrong place?”

  2. By Eggman23 on Jun 6, 2008 | Reply

    The holes with sharpie use washer on the holes with sharpie use washer on the holes with sharpie use washer on the inside.
    The hole pattern and mark with spackle or wood putty and mark with spackle or wood putty and mark with sharpie use washer on the hole pattern and mark with sharpie use washer on the hole pattern and mark with the inside.

  3. By I am, I said on Jun 9, 2008 | Reply

    The color of colors fill the knobs.

  4. By renegadesail on Jun 9, 2008 | Reply

    For the center of the upper doors can be plugged with decoration of the henges for lower corner away from the upper corner for lower doors and inches in the proper location.

  5. By I KNOW on Jun 10, 2008 | Reply

    change the doors is about it ps fillers will look like hell

  6. By robbtulsa on Jun 12, 2008 | Reply

    For an escutcheon that can be 14 inches in is paintable and wont take the old holes like that can try famowood wood species as.
    An escutcheon that can try wwwhomehardwareusacom for ideas.

Sorry, comments for this entry are closed at this time.